188 Rockwell Automation Publication D2-3518-4 - January 2020
Chapter 9 Parameter Descriptions
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
Displays the measured ambient temperature inside the power module in
degrees C.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
Displays the measured drive power supply temperature in degrees C.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
Displays the measured voltage of the +12V power supply.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
Displays the measured voltage of the –12V power supply.
350
Rct Ambient Tmp
Range: -3276.8...3276.7 °C
Default: Read Only
Access: 1 Path: Inputs & Outputs > Temperature etc
See also:
351
Rct PS Tmp
Range: -3276.8...3276.7 °C
Default: Read Only
Access: 1 Path: Inputs & Outputs > Temperature etc
See also:
352
Rct PS +12V
Range: -3276.8...3276.7V °C
Default: Read Only
Access: 1 Path: Inputs & Outputs > Temperature etc
See also:
353
Rct PS -12V
Range: -3276.8...3276.7V °C
Default: Read Only
Access: 1 Path: Inputs & Outputs > Temperature etc
See also:
To Next Page
Loading...
