Rockwell Automation Publication D2-3518-4 - January 2020 189
Parameter Descriptions Chapter 9
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
Displays the measured voltage that identifies which type of IO board is installed.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
354
Rct I/O ID V
Range: -3276.8...3276.7V °C
Default: Read Only
Access: 1 Path: Inputs & Outputs > Temperature etc
See also:
To Next Page
Loading...
