Rockwell Automation Allen-Bradley LiquiFlo 2.0 - Page 241

Rockwell Automation Publication D2-3518-4 - January 2020 241
Using the OIM Appendix B
Preset Speed 1...6: Toggles the selected preset speed on and off and grants Hand
(manual) reference control. Returns to Auto reference when the function is
toggled.
View Fault Queue: Displays the Fault Queue screen (see Accessing the Fault
Queue on page 222). Press to return to the process display screen.
Next: (Reserved for future use.)
Customizing the Function Key Label Text
You can customize the text for each function key label (up to five characters). See
Figure 101
.
Figure 101 - Customizing the Function Key Label Text
ESC/
PROG
Function List:
Load User Set 1
Load User Set 2
Undefined
Do You Wish to
Rename Function
States Text For:
Load User Set 1
Yes No
Function List
F2: Undefined
F3: Undefined
F1: Load User Set 1
ClrFK
Name State Text:
FKey Text
LuseA
ABCDEFGHKLM
Next
F1
F2
OIM will use default
F-Key label Luse1
Function List
F2: Undefined
F3: Undefined
F1: Load User Set 1
ClrFK
F4
OIM will use custom
F-Key label LuseA
Move through label text
Move through letters and
symbols
P0: LiquiFlo 2.0
Auto
Stopped
Fltq
0.00 Volts
Amps
Hz
0.00
0.00
Luse1
P0: LiquiFlo 2.0
Auto
Stopped
Fltq
0.00 Volts
Amps
Hz
0.00
0.00
LuseA
A->a
Save
F3
Esc or timeout to
Process Display
screen
Esc or timeout to
Process Display
screen
From previous figure
Toggle between upper
and lower case