Rockwell Automation Allen-Bradley LiquiFlo 2.0 - Page 73

Rockwell Automation Publication D2-3518-4 - January 2020 73
Parameter Descriptions Chapter 9
• Parameter 22 displays the phase U RMS current value.
• Parameter 23 displays the phase V RMS current value.
• Parameter 24 displays the phase W RMS current value.
The estimated input power of the drive. This value is calculated as a function of
the output power.
The drive power rating.
The drive output voltage class.
The drive rated RMS output current.
25
Est Input Power
Range: 0.0...3000.0 [0.1 kW]
Default: Read Only
Access: 1 Path: Monitor > Metering
See also: 7
26
Rated kW
Range: 0.00...3000.00 kW [0.01 kW]
Default: Read Only
Access: 1 Path: Monitor > Drive Data
See also:
27
Rated Volts
Range: 480V [0.1V AC]
Default: Read Only
Access: 1 Path: Monitor > Drive Data
See also:
28
Rated Amps
Range: 0.0...6553.5 Amps [0.1 A]
Default: Read Only
Access: 1 Path: Monitor > Drive Data
See also:
29
Control SW Ver
Range: 0.000...65.256 [0.001]
Default: Read Only
Access: 1 Path: Monitor > Drive Data
See also: 196
32