Rockwell Automation Allen-Bradley LiquiFlo 2.0 - Page 79

Rockwell Automation Publication D2-3518-4 - January 2020 79
Parameter Descriptions Chapter 9
Set to the motor nameplate rated volts. The motor nameplate base voltage
defines the output voltage when operating at rated current, rated speed, and rated
temperature.
Set to the motor nameplate rated full load amps. The motor nameplate FLA
defines the output amps when operating at rated voltage, rated speed, and rated
temperature. It is used in the motor thermal overload and in the calculation of
slip.
Set to the motor nameplate rated frequency. The motor nameplate base
frequency defines the output frequency when operating at rated voltage, rated
current, rated speed, and rated temperature.
Set to the motor nameplate rated RPM. The motor nameplate RPM defines the
rated speed when operating at motor nameplate base frequency, rated current,
base voltage, and rated temperature. This is used to calculate slip.
41
Motor NP Volts
Range: 0.0 to Drive Rated Volts [0.1V AC]
Default: Based on Drive Type
Access: 0 Path: Motor Control > Motor Data
See also:
42
Motor NP FLA
Range: 0.0 to Rated Amps x 2 [0.1 A]
Default: Based on Drive Type
Access: 0 Path: Motor Control > Motor Data
See also: 47, 48
43
Motor NP Hertz
Range: 5.0...250.0 Hz [0.1 Hz]
Default: Based on Drive Type
Access: 0 Path: Motor Control > Motor Data
See also:
44
Motor NP RPM
Range: 60...24000 RPM [1 RPM]
Default: 1780 RPM
Access: 0 Path: Motor Control > Motor Data
See also:
45
Motor NP Power
Range: 0.00...3000.00 [0.01 kW or 0.01 HP]
Default: Based on Drive Type
Access: 0 Path: Motor Control > Motor Data
See also: 46
32