Rockwell Automation Allen-Bradley LiquiFlo 2.0 - Page 90

90 Rockwell Automation Publication D2-3518-4 - January 2020
Chapter 9 Parameter Descriptions
Scales the upper value of the Speed Ref B Sel (93) selection when the source is an
analog input.
Scales the lower value of the Speed Ref B Sel (93) selection when the source is an
analog input.
Specifies the manual speed reference source when a digital input is configured for
auto/manual and manual reference mode is active.
Scales the upper value of the TB Man Ref Sel selection when the source is an
analog input.
Scales the lower value of the TB Man Ref Sel selection when the source is an
analog input.
94
Speed Ref B Hi
Range: -/+Maximum Speed [0.1 Hz]
Default: Maximum Speed
Access: 0 Path: Speed Command > Speed References
See also: 82
95
Speed Ref B Lo
Range: -/+Maximum Speed [0.1 Hz]
Default: 0.0 Hz
Access: 0 Path: Speed Command > Speed References
See also: 81
96
TB Man Ref Sel
Range: 1 = Analog In 1
2 = Analog In 2
3...8 = Reserved
9 = MOP Level
Default: 2 = Analog In 1
Access: 0 Path: Speed Command > Speed References
See also: 97, 98
97
TB Man Ref Hi
Range: -/+Maximum Speed [0.1 Hz]
Default: Maximum Speed
Access: 0 Path: Speed Command > Speed References
See also: 96
98
TB Man Ref Lo
Range: -/+Maximum Speed [0.1 Hz]
Default: 0.0 Hz
Access: 0 Path: Speed Command > Speed References
See also: 96