Rockwell Automation Allen-Bradley LiquiFlo 2.0 - Page 91

Rockwell Automation Publication D2-3518-4 - January 2020 91
Parameter Descriptions Chapter 9
Sets the output frequency when a jog command is issued.
Provides an internal fixed speed command value when Speed Ref A = Preset Spd
1...7.
100
Jog Speed
Range: 0 to Maximum Speed [0.1 Hz]
Default: 10.0 Hz
Access: 0 Path: Speed Command > Discrete Speeds
See also:
101
102
103
104
105
106
107
Preset Speed 1
Preset Speed 2
Preset Speed 3
Preset Speed 4
Preset Speed 5
Preset Speed 6
Preset Speed 7
Range: -/+Maximum Speed [0.1 Hz]
Default: See Table 7 on page 92
Access: 101...107 = 0 Path: Speed Command > Discrete Speeds
See also: 90, 93