Rockwell Automation Allen-Bradley PowerFlex 700S User Manual

Rockwell Automation Publication PFLEX-RM003E-EN-E - January 2011 201
Detailed Drive Operation Chapter 1
16 Position Selector Switch:
Configuration:
• Parameter 1022 [Sel Switch Ctrl] is the control parameter for the switches
and selector switch user functions. 16 input selector switches are
controlled using bits 0…4.
– Bit 0 “SSW DataPass” updates the output. If bit 0 is low, the output is NOT
updated with the selected input.
– Bit 1 “Sel Swtch 00”…bit 4 “Sel Swtch 03” are the binary coded decimal
(BCD) selection of the 16 inputs to the switch. Bit 1 is the least significant
bit (LSB). (See parameters 1029…1044 below.)
1029
1030
1031
0
1
2
3
4
5
6
1032
1034
1035
7
8
9
10
1036
1037
1038
1039
1040
12
13
14
15
11
1022 01 02 03 04
1033
1041
1042
1043
1044
1045
1046
SelSwtch DIntOut
SelSwtch RealOut
with Rounding
1022 00
Sel Swtch Ctrl
Sel Swtch Ctrl
SelSwtch In01
SelSwtch In02
SelSwtch In03
SelSwtch In04
SelSwtch In05
SelSwtch In06
SelSwtch In07
SelSwtch In08
SelSwtch In09
SelSwtch In10
SelSwtch In11
SelSwtch In12
SelSwtch In13
SelSwtch In14
SelSwtch In15
SelSwtch In00

Rockwell Automation Allen-Bradley PowerFlex 700S Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley PowerFlex 700S
Category	Controller
Language	English