Rockwell Automation MD60 - Page 99

Record of User Settings B-3
A100 Fault Clear 0 = Ready 9-21
A101 Program Lock 0 = Unlocked 9-21
A102 Testpoint Select 0000 9-22
A103 Comm Data Rate 4 = 19.2 K 9-22
A104 Comm Node Address 1 9-22
A105 Comm Loss Action 0 = Fault 9-22
A106 Comm Loss Time 5.0 9-23
A107 Comm Format 0 = RTU 8-N-1 9-23
A110 0 - 10 V Analog Input
Low
0.0% 9-24
A111 0 - 10 V Analog Input
High
100.0% 9-24
A112 4 - 20 mA Analog Input
Low
0.0% 9-25
A113 4 - 20 mA Analog Input
High
100.0% 9-25
A114 Slip Compensation 2.0 Hz 9-25
A115 Process Time Lo 0.00 9-26
A116 Process Time Hi 0.00 9-26
No. Parameter Name
Default
Value
Page
No. User Setting