Rohde & Schwarz NRPxxA Series - Global Flags; S-Parameter Correction on by Default; S-Parameter Correction State Locked

Remote Control Commands
R&S
®
NRPxxA(N)
102User Manual 1177.6017.02 ─ 05
Show Cal. Data ← Options ← Menu bar
Displays the content of the calibration data set that has been loaded either from a file
of directly from a sensor as a plain text.
You can copy the text output to the clipboard by clicking "Copy to Clipboard."
Figure 9-6: Example
Global Flags
Groups the settings for the power sensor behavior regarding S-parameter corrections.
S-Parameter Correction ON by Default ← Global Flags
If this option is enabled, the S-parameter correction is activated automatically when the
sensor is started.
S-Parameter Correction State Locked ← Global Flags
If enabled, the state that is selected with "S-Parameter Correction ON by Default" is
locked and cannot be changed using:
●
[SENSe<Sensor>:]CORRection:SPDevice:STATe
Configuring Basic Measurement Parameters