Rohde & Schwarz NRPxxA Series - Operation Upper Limit Fail Status Register

Remote Control Basics
R&S
®
NRPxxA(N)
156User Manual 1177.6017.02 ─ 05
11.3.8.6 Operation Upper Limit Fail Status Register
The CONDition register contains information about whether a displayed value is
above a configured upper limit. The EVENt register indicates whether a limit value was
exceeded since the last readout of the Operation Upper Limit Fail Status Register.
Querying the register:
●
STATus:OPERation:ULFail:CONDition?
●
STATus:OPERation:ULFail[:SUMMary][:EVENt]?
Table 11-16: Meaning of bits used in the operation lower limit fail status register
Bit No. Meaning
0 Not used
1 Upper limit fail
The measured value exceeds the upper limit value.
5 to 15 Not used
Status Reporting System