List and Sweep Mode
R&S
®
SMA100B
179User Manual 1178.3834.02 ─ 05
"Strictly Monotone"
Executes signal level changes monotonically increasing or decreas-
ing.
The setting makes sure that increasing the level value exclusively
results in an increased output level, and vice versa.
All electronic switches, which might affect the monotonicity are fixed.
The operation mode is useful for applications using level searching
algorithms which rely on a strictly monotonous behavior.
"Constant-VSWR"
Suppresses output impedance variations at the RF output connector,
due to changed level settings.
"High Dyn. Uninterrupted"
R&S SMAB-K724
Provides a linear output power that is uninterrupted over a wide
dynamic range.
"User"
Indicates that a setting has been modified in the expert mode. The
expert mode is a protected function, that requires protection level 2
password.
Remote command:
[:SOURce<hw>]:POWer:LBEHaviour on page 631
6.5.4 Output Settings
Option: R&S SMAB-B28
Access:
1. Select for example "Sweep" > "RF Frequency Sweep".
2. Select "Output".
Settings
V/GHz / X-Axis ........................................................................................................... 179
Marker / User ............................................................................................................. 180
V/GHz / X-Axis
Option: R&S SMAB-B28
Selects the mode the voltage is supplied depending on the frequency.
Sweep Mode Settings
To Next Page
Loading...
