Network Operation and Remote Control
R&S
®
SMA100B
395User Manual 1178.3834.02 ─ 05
3. Select "File..."
The "SCPI Recording Export - Select Output File" dialog opens.
4. Select "New" and assign a filename for saving the recorded list.
5. In the "SCPI Recording Export" dialog, select "Export".
Saves the recorded data either in ASCII format (plain SCPI), or in the correspond-
ing format of the used code template, and shows the SCPI list in the "File Content"
section.
12.16 How to Set Up Remote Operation via VNC
This section shows you some examples of the various possibilities to set up remote
operation.
●
Using a desktop system
– Chapter 12.16.1.1, "Using a Web Browser", on page 395
– Chapter 12.16.1.2, "Using a VNC Client Software", on page 396
●
Using a smart device
– Chapter 12.16.2.1, "Using a VNC App", on page 399
– Chapter 12.16.2.2, "Using a Web Browser with HTML5", on page 399
– Chapter 12.16.2.3, "Special Mode QR Code ", on page 400
Enabled direct control
The direct control of the instrument is not disabled and the instrument can be control-
led from the front panel and via the remote computer alternately.
12.16.1 Setting Up a Remote Operation from a Desktop System
12.16.1.1 Using a Web Browser
The R&S SMA100B supports remote operation via VNC with any web browser, like
Windows Internet Explorer or Mozilla Firefox for instance, or alternatively, an HTML5
web browser.
To operate the instrument via a web browser remotely:
1. Install the JRE (Java Runtime Environment) on the remote computer.
Note: Skip this step if you are working with an HTML5 web browser.
2. Type the instruments' IP address in the address field of the web browser on your
PC, e.g. http://10.113.1.151
The VNC authentication screen appears.
How to Set Up Remote Operation via VNC
To Next Page
Loading...
