Clock Synthesis
R&S
®
SMA100B
278User Manual 1178.3834.02 ─ 05
9 Clock Synthesis
The clock synthesis provides a separate system clock with a freely selectable fre-
quency for test setups that require an additional clock reference. For example, in a test
setup that uses an A/D converter, the required system clock for data sampling can be
provided without the need of additional signal generator.
Output connectors
The generated clock reference is synchronized to the selected reference clock of the
signal generator (internal or external). The differential signal is output at the [Clk Syn]
and [Clk Syn N] connectors.
Required options
●
Option frequency R&S SMAB-B10x
●
Option differential clock synthesis up to 3 GHz R&S SMAB-B29
●
Option clock synthesis extension 6 GHz R&S SMAB-K722
(requires at least R&S SMAB-B106)
For more information, see data sheet.
Settings
Access:
1. Select "Clk Syn/Power Sens > Clock Synthesis".
2. Select "User Variation" to set the step width to be used when setting the clock fre-
quency using the rotary knob.
To Next Page
Loading...
