List and Sweep Mode
R&S
®
SMA100B
188User Manual 1178.3834.02 ─ 05
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog? on page 623
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect on page 623
[:SOURce<hw>]:CORRection:DEXChange:AFILe:CATalog? on page 588
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect on page 589
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:CATalog? on page 539
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SELect on page 539
Select Source/Select ASCII Destination
In "Mode > Export", access the file select dialog that provides standard file handling
functions.
Where:
●
"Select Source": selects the file to be exported
●
"Select ASCII Destination": defines the filename and the file path for the exported
file
Remote command:
[:SOURce<hw>]:LIST:DEXChange:SELect on page 624
[:SOURce<hw>]:CORRection:DEXChange:SELect on page 590
[:SOURce<hw>]:PULM:TRAin:DEXChange:SELect on page 540
Import / Export
Imports or exports the selected data list file, depending on the current mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:EXECute on page 623
[:SOURce<hw>]:CORRection:DEXChange:EXECute on page 589
[:SOURce<hw>]:PULM:TRAin:DEXChange:EXECute on page 540
6.7 List Editor
The "User Correction" and "List Mode" dialogs provide a build-in list editor for defining
the corresponding value pairs.
The table and navigation functions of the UCOR and list mode editors have the same
structure and are therefore summarized below. The access is specified for both modes,
the fields and functions are explained using the example of the list mode.
List Editor
To Next Page
Loading...
