Remote Control Commands
R&S
®
SMA100B
670User Manual 1178.3834.02 ─ 05
:SYSTem:SECurity:SANitize[:STATe] <SecPassWord>, <MmemProtState>
Sanitizes the internal memory.
Parameters:
<MmemProtState> 0 | 1 | OFF | ON
*RST: 0
Setting parameters:
<SecPassWord> string
Example:
SYSTem:SECurity:SANitize[:STATe] 1
Manual operation: See "Sanitize" on page 336
:SYSTem:SECurity:SUPolicy
<SecPassWord>, <Update Policy>
Configures the automatic signature verification for firmware installation.
Parameters:
<Update Policy> STRict | CONFirm | IGNore
*RST: n.a. (factory preset: CONFirm)
Setting parameters:
<SecPassWord> string
Manual operation: See "Secure Update Policy" on page 335
:SYSTem:SPECification? <Id>
Retrieves data sheet information for a specific parameter.
Setting parameters:
<Id> string
Identifies the name of the entry in the data sheet, as quieried
with the command :SYSTem:SPECification:
IDENtification:CATalog? on page 671
Return values:
<ValList> float
Comma-separated list with the specified and, if available, the
typical value of the parameter, as specified in the data sheet.
See also "Data Sheet" on page 372.
SYSTem Subsystem
To Next Page
Loading...
