Rohde & Schwarz SU 4200 - Page 133

List of Remote Control Commands R&S SU 4200
6.15 6125.0226.12.01
Code Command/
parameter
Module Type Unit Step
size
Range Default Description
IP TCP/IP
Address of
One Radio
Module
TX GET IP address
Netmask
Gateway
192.168.52.102
255.255.255.0
192.168.52.1
Provides IP
address,
netmask and
gateway of
one radio
module.
LO Location
Info
TX GET
SET
– – 10 lines each,
max. 20
characters
No text
LT Measure TX
Audio Level
TX GET dBm 1 –30 to +10
dBm settable
via software
– Measures
current audio
level on TX
audio input
(connector
X5).
ND Inventory
Detail
TX GET – – – – Provides
detailed
information
such as ID
No., serial
number,
version index.
TI Setting RTC TX GET,
SET
– – YYYY/MM/DD
and
hh:mm:ss
– Gets/Sets
date and time
of all radio
modules.
UO User Output TX – 0=OFF,
1=ON
– Sets the user
contact of
output port
given in the
first
parameter.
UI User Input TX GET,
TRAP
0=OFF,
1=ON
0=OFF Provides the
input signal of
user contacts.
VE GB2PP
Version
TX GET – – Text – Provides the
ICD version
which applies
for the current
software
release.