Rohde & Schwarz SU 4200 - Overview of Operation; Fig. 3.7 Overview of Operation

R&S SU 4200 Local Control (Local Mode)
6125.0226.12.01 3.16
3.4.1 Overview of Operation
Overview o f operation\ Overview o f operation "R adio".doc
Standard
Operating Display
Main Menu
Operation Time/Date Measurement CBIT Status Inventory Configuration
ESC MENU
Picture: Menu Guide MMI
Activation
Boot Display
Boot process finished
Preset No
Mode
Frequency
Offset TX
TX Parameter
RX Parameter
Supply
Temperature
Component
No 1
Component
No 2
Component
No N
ESC Enter
ESC
ESC
ESC
IP Address
RS-485
Frequency
Block
ESC
Display
Settings
External
Voltages
RF Power
Fig. 3.7 Overview of operation
Menu control
The transmitter is menu-driven using the keypad (see chapter
3.4.2).
The MENU key takes you to the main menu at any time. From the main
menu, you can reach lower menus/submenus by using the cursor keys and
the ENTER key. Pressing the ESC key takes you to the next-higher menu.
If you are in the main menu, you can go to the standard operating display
by pressing the ESC key.