Rohde & Schwarz SU 4200 - Radio Control Via; Fig. 3.51 Radio Control Via

Remote Control (Remote Mode) R&S SU 4200
3.51 6125.0226.12.01
3.5.2 Radio Control via RS-485
Radio control
via RS-485
The transmitter supports remote control via serial line interface RS-485. A
maximum of eight devices can be put on one RS-485 bus. Additionally there
must be connected one RC client which controls the connected device. The
transmitter does not support RS-485 bus configurations with more than one
RC client.
Fig. 3.51 Radio control via RS-485
Note: The remote control and fault management features of transmitter are
based on the typical customer systems. For a detailed description of the
remote control commands see chapter
6.3.