R&S SU 4200 List of Remote Control Commands
6125.0226.12.01 6.14
6.3.1.3 General Radio Functionality (GR)
General Radio Functionality\General Radio Functionality "Radio".doc
Code Command/
parameter
Module Type Unit Step
size
Range Default Description
AT All Traps
Off
TX SET – – – – Unsubscribes
all traps for
the client.
CO Enable
5-Carrier
Offset
TX GET – – 0 to 1 OFF Provides
information
about current
configuration
of 5-carrier
offset
possibility. By
default
5-carrier offset
is OFF.
(0=OFF,
1=ON)
CS CBIT Status TX GET,
TRAP
– – List of CBIT
warnings/errors
– Provides all
currently
recognized
CBIT events.
DS Device
Status
TX GET,
TRAP
– – Active/Inactive
GO/NOGO
(error)
NO/local/
remote
control
–
EX External
Power
Amplifier
TX GET – 1 0/1 0=OFF Indicates
whether
external
power
amplifier is
connected
or not.
IL Inventory
List of
Module/
Chassis
TX GET – – Inventory List
of radio
– Provides
complete
inventory list
of all installed
hardware and
software
components.
IN Installation
Info
TX GET – – Max. 20
characters
No text
To Next Page
Loading...
