R&S SU 4200 Unpacking and Checking
6125.0226.12.01 2.2
2.2 Unpacking and Checking
Recommended
procedure
1.
After delivery carry out the following steps:
2. Unpack the transmitter.
3. Check if delivery (transmitter and accessories) is complete by referring
to the delivery note (see Accessories in the Appendix).
4. Check the transmitter and accessories for signs of damage which may
have occurred during transit.
5. Contact the shipping agent immediately if damage is found.
6. Keep the packaging (box, etc.) for later use, e.g. if the transmitter is to
be sent to the nearest Rohde & Schwarz representative for repair (see
the List of Rohde & Schwarz Offices following the title page of this
manual).
0.
To Next Page
Loading...
