Rohde & Schwarz SU 4200 - Event Handling; Error Handling; SNMP Commands

List of Remote Control Commands R&S SU 4200
6.17 6125.0226.12.01
6.3.1.6 Event Handling (EV)
Event Handling\ Event Handl ing "Radio ".doc
Code Command/
parameter
Module Type Unit Step
size
Range Default Description
CL
(LAN
only)
Clear Event
List
TX SET – – – – Clears whole
event list.
EL
(LAN
only)
Read Event
List
TX GET – – List of radio
events
– Provides
whole event
list.
EE
(LAN
only)
Read Event
Entry
TX GET,
TRAP
– 1 1 to
999999
– Provides
detailed
information
about
specified
event entry.
SR
(LAN
only)
Read
Sequence
Number
Page
TX GET – – 0 to 255 – Provides the
sequence
number of the
oldest item
and the
numbers of
items in the
event list.
6.3.1.7 Error Handling (ER)
Error Handli ng\Error Handl ing "Radio ".doc
Code Command/
parameter
Module Type Unit Step
size
Range Default Description
GN GO/NOGO
Status
TX GET
TRAP
– – 0/1 – Indicates
current radio
GO
(GO/NOGO)
state.
BE Boot Error
List
TX GET – – Record of
elements
and boot
error list
– Retrieves the
list of errors
that occurred
during the last
radio booting.
ACARS Mode Co mmands\ACARS Mode Commands "Radi o".doc
Remote Updat e Commands\ Remote Update Commands "Radio ".doc
6.3.2 SNMP Commands
The functionality of the SNMP commands is nearly identical to the GB2PP
commands. The SNMP commands can be extracted from the SNMP-MIB
files.
Note: The SNMP-ICD and the SNMP-MIBs can be found on the SNMP
data CD (Order No. 6144.7574.03) which has to be ordered separately.