Roland Fantom-X6 - Placing the Fantom-X8 on a Stand (For Fantom-X8 user)

20
Getting Ready
If you want to place the Fantom-X8 on a stand, use the Roland KS-17. Place the instrument on the stand as follows.
fig.02-001.e
Placing the Fantom-X8 on a Stand (For Fantom-X8 user)
Stand screws
Rubber feet of the Fantom-X8
Place so that it is immediately above
Center
Place it so the center of the stand comes
between the "a" and "n" of the word "Fantom."
Fantom-X678_r_e.book 20 ページ ２００５年５月１２日 木曜日 午後４時４０分