Roland Fantom-X6 User Manual

22
Getting Ready
The characters in the display may be difficult to view immediately after turning on the Fantom-
X’s power or after extended use. Your viewing angle or the current lighting conditions can also
affect the appearance of the display. In such situations, you can turn the CONTRAST knob
(located on the rear panel) to adjust the contrast of the display.
fig.02-005
1. Before you turn off the power, consider these two questions:
• Have the volume controls for the Fantom-X and all connected audio devices been
turned to their lowest settings?
• Have you saved your Fantom-X sounds or other data you’ve created?
2. Turn off the power for all connected audio devices.
3. Turn off the POWER ON switch of the Fantom-X.
Adjusting the Display Contrast (LCD Contrast)
Turning Off the Power
If you need to turn off the
power completely, first turn
off the POWER switch, then
unplug the power cord from
the power outlet. Refer to
“Power Supply” (p. 4).
Fantom-X678_r_e.book 22 ページ ２００５年５月１２日 木曜日 午後４時４０分

Roland Fantom-X6 Specifications

General

Keyboard	61 keys (with velocity and channel aftertouch)
Polyphony	128 voices
Wave Memory	128 MB (16-bit linear equivalent)
User Patches	256
User Rhythm Sets	32
Preset Performances	64
User Performances	64
Arpeggiator	Yes
Preset Patches	1, 024 + 256 (GM2)
Preset Rhythm Sets	40 + 9 (GM2)
Effects	Reverb, chorus
Display	320 x 240 backlit LCD
Sequencer	16-track sequencer with 480 TPQN resolution
Sampling	Yes (up to 544MB RAM with optional DIMM)
Expansion Slots	4 SRX expansion slots
USB	USB MIDI
Weight	12.5 kg (27 lbs 9 oz)
Connectivity	MIDI, USB, line in/out, headphone, pedal
Storage	CompactFlash slot
Power Supply	AC 117 V, AC 230 V (50/60 Hz)