Roland Fantom-X6 User Manual

25
Various Performance Features
Control Pedal
If an optional expression pedal or pedal switch (EV-5, DP-2.) is connected to the rear panel
PEDAL CONTROL jack, you can use the pedal to control the volume or various function.
fig.02-011
Transpose (Trans)
You can transpose the pitch of the keyboard in semitone steps, over a range of G–F# (-5– +6
semitones) by adjusting the Transpose parameter’s value.
Press [CURSOR] to move the cursor to “Trans” in the upper part of the screen, and turn the
VALUE dial or press [INC] or [DEC] to change its setting.
fig.02-012
Roland
Use only the specified
expression pedal or pedal
switch (EV-5, DP-2; sold
separately). By connecting any
other expression pedals, you
risk causing malfunction and/
or damage to the unit.
The way in which the sound
changes will depend on the
settings. For details on settings
for parameters controlled by
the pedal, refer to “Making
Control Pedal Settings”
(“Making Control Pedal
Settings” (p. 126)).
For details, refer to
“Transposing the Keyboard in
Octave Units (Octave Shift)”
(“Transposing the Keyboard
in Octave Units (Octave
Shift)” (p. 45)).
Fantom-X678_r_e.book 25 ページ ２００５年５月１２日 木曜日 午後４時４０分

Roland Fantom-X6 Specifications

General

Keyboard	61 keys (with velocity and channel aftertouch)
Polyphony	128 voices
Wave Memory	128 MB (16-bit linear equivalent)
User Patches	256
User Rhythm Sets	32
Preset Performances	64
User Performances	64
Arpeggiator	Yes
Preset Patches	1, 024 + 256 (GM2)
Preset Rhythm Sets	40 + 9 (GM2)
Effects	Reverb, chorus
Display	320 x 240 backlit LCD
Sequencer	16-track sequencer with 480 TPQN resolution
Sampling	Yes (up to 544MB RAM with optional DIMM)
Expansion Slots	4 SRX expansion slots
USB	USB MIDI
Weight	12.5 kg (27 lbs 9 oz)
Connectivity	MIDI, USB, line in/out, headphone, pedal
Storage	CompactFlash slot
Power Supply	AC 117 V, AC 230 V (50/60 Hz)