234
Settings Common to All Modes (System Function)
Load Preset Samples at Startup
Specifies whether the preset samples will be loaded into memory at
power-on (ON) or not (OFF).
Value:
OFF, ON
Load User Samples at Startup
Specifies whether the samples of the user area and memory card will
be loaded into memory at power-on (ON) or not (OFF).
Value:
OFF, ON
Load Demo Song at Startup
Specifies whether the demo song will be loaded into the temporary
area when you power up the Fantom-X (ON), or will not be loaded
(OFF).
Rec Track Select (Recording Track Select)
This specifies whether track selection will be automatic or manual
when recording on the sequencer.
Value
Manual:
You’ll be able to select the track number manually. This
is convenient when you want to record a performance
that consists of more than one channel.
Auto:
The phrase track of the same number as the current part
will be selected automatically. This is convenient when
you want to record only one channel in a track.
Power Up Mode
This setting allows you to choose the mode that you want the
Fantom-X to be in when it is powered up.
Value
PATCH:
The Fantom-X will be in Patch mode when you
turn on the power.
PERFORMANCE:
The Fantom-X will be in Performance mode
when you turn on the power.
For details on the indicating, refer to
“How to Make System
Function Settings”
(p. 225).
Features
Displays the main features of the Fantom-X.
Memory Info (Memory Information)
Displays the amount of memory installed.
SRX Info (SRX Information)
Displays the name of the wave expansion board that is installed.
Version Info (Version Information)
Displays the version of the Fantom-X.
Start up
System Information
Fantom-X678_r_e.book 234 ページ ２００５年５月１２日 木曜日 午後４時４０分
To Next Page
Loading...
Need help?
General
