Roland LEF-12 - Core Operational Workflow

9
Chapter 1 Basic OperationChapter 1 Basic Operation
Basic Operation
Basic Operation Flow
1. Power on
 P. 10, "Switching the Power On and Off"
When Starting Daily Operations
2. Secure the media
 P. 11, "How to Secure the Media"
3. Set the height position of media
 P. 13, "Set height position of media (automatic)"
 P. 15, "Set height position of media (manual)"
4. Set the print area
 P. 17, "Specify the print area directly"
 P. 19, "Specifying the Print Area from the Print Center Position"
5. Perform printing test and normal cleaning
 P. 20, "Printing Test and Normal Cleaning"
Actual Printing
6. Repeat 2 through 4.
7. Print
 P. 22, "Start Printing"
After Daily Operations
8. Perform printing test and normal cleaning
 P. 20, "Printing Test and Normal Cleaning"
Perform "Printing Test and Normal
Cleaning" (P. 20) periodically during
operation also.