Roland LEF-12 - Replacing Consumable Parts; Replacing the Wiper

71
Chapter 3 Maintenance
Replacing Consumable Parts
Replacing the Wiper
The wipers are components that you use when cleaning the print heads.
When the screen displays a message like the one shown, it means the
item needs to be replaced. Replace with new items.
For information about purchasing wipers, contact your authorized
Roland DG Corp. dealer.
When a warning beep sounds during wiper replacement
A warning beep sounds 10 minutes after operation begins. Stop work and close the front cover. Press
to quit the wiper replacement menu. After that, restart the procedure from the beginning.
CAUTION
Be sure to perform operations as specied in these instructions, and
never touch any area not specied in the instructions.
Sudden movement of the machine may cause injury.
1. Enter the WIPER REPLACE menu

When the message shown in the gure appears, press
.

Remove any media.

Press .

Press several times until the screen shown on
the left appears.
Press
.
Press
twice.

Press , and then .

Press .
The print-head carriage, and then the screen shown in the gure
appears.

Open the front cover.
TIME FOR
WIPER REPLACE
TIME FOR
WIPER REPLACE
MENU
SUB MENU
SUB MENU
MAINTENANCE
MAINTENANCE
REPLACE WIPER
NOW PROCESSING. .
OPEN FRONT
COVER