4
Chapter 1 Basic OperationChapter 1 Basic Operation
Part Names and Functions
Printer Unit
Front
Rear
Ink cartridge cover
Keep this cover closed ex-
cept when necessary, such
as when replacing the ink
cartridges.
Cartridge slots
The location where ink
cartridges are installed.
Front cover
Keep this cover closed except
when necessary, such as when
loading media.
UV-LED device
Carriage fan
Spins while printing.
Print-head carriage
The print heads are inside this
carriage.
Operation panel
P. 5, "Operation panel"
Panel cover
Drain bottle
Flat table
Media gap sensor
Used to detect height position
of media.
Main power switch
Power-cord connector
Status LED
This ashes yellow while data is being received from the network.
Link LED
This lights up green when the connection to the network is correct.
Ethernet connector
This is used to connect the printer to a network.
Ventilator connection
Rear fan cover
A built-in rear fan that spins
when printing. Remove the
cover when replacing the
rear fan lter.
To Next Page
Loading...
