Roland LEF-12 - Administrative Settings and Configuration

44
Chapter 2 Fully Utilizing the MachineChapter 2 Fully Utilizing the Machine
Fully Utilizing Convenient Print Features
Continuously Outputting Print Data
Procedure

Press .

Press several times until the screen shown on
the left appears.
Press
, and then .

Press .

Press to select “ENABLE.”
Press
to enable the setting.

Press in this order to go back to the
original screen.
Description
If "ENABLE" is selected
When multiple print data are sent at a time from the computer, the print data can be output in a row. This
feature is useful when you want to output multiple data in a row without replacing the media.
If "DISABLE" is selected
Even when multiple data are sent at a time from the computer, they are not output in a row and the screen
shown below appears when one data is output. If you want to replace the media for each print data, select
"DISABLE."
When this screen is displayed, no data is accepted from the computer.
Pressing
to return to the screen shown on the left, and data
can be accepted from the computer .
Default Settings
[PRT CONTINUE]: DISABLE
MENU
SUB MENU
SUB MENU
PRT CONTINUE
PRT CONTINUE
ENABLE DISABLE
W :  mm L :  mm
H :  .  mm
SETUP MEDIA
FINISHED PRINT
Ｗ：X X X ｍｍ Ｌ：X X X ｍｍ
Ｈ：X X X ｍｍ