Roland LEF-12 - Reducing Output Time

Fully Utilizing Convenient Print Features
45
Chapter 2 Fully Utilizing the MachineChapter 2 Fully Utilizing the Machine
Reducing Output Time
Procedure

Press .

Press several times until the screen shown on
the left appears.
Press
.

Press several times until the screen shown on
the left appears.
Press
.

Press to select "PRTAREA" or "OFF."
PRTAREA
Adjust the operating range of the print head to the preset print area.
OFF
"OFF" matches the range of print head movement to the output
data. Movement is limited to the minimum amount necessary, and
this can be expected to yield the fastest output.When this feature is
used, the time needed for the ink to harden is not constant, and an
uneven color may result.
FULL
The media moves at a constant speed. The most stable output result
can be obtained.
Press to enable the setting.

Press in this order to return to the origi-
nal screen.
Description
The output time is reduced by restricting the operating range of the print head. This feature is eective when
the print area or output data has a small width.
Default Settings
[FULL WIDTH S]: FULL
MENU
SUB MENU
SUB MENU
FULL WIDTH S
FULL WIDTH S
FULL OFF
W :  mm L :  mm
H :  .  mm
SETUP MEDIA