Roland LEF-12 - Replacing the Filter

Replacing Consumable Parts
74
Chapter 3 Maintenance Chapter 3 Maintenance
Replacing the Filter
This section explains how to replace the lter used for the mist fan
that adjusts scattering of ink mist. When the screen displays a message
like the one shown, it means the item needs to be replaced. Replace
with new items.
For information about purchasing lters, contact your authorized
Roland DG Corp. dealer.
When a warning beep sounds during lter replacement
A warning beep sounds 10 minutes after operation begins. Stop work and close the front cover. Press
to quit the lter replacement menu. After that, restart the procedure from the beginning.
CAUTION
Be sure to perform operations as specied in these instructions, and
never touch any area not specied in the instructions.
Sudden movement of the machine may cause injury.
1. Enter the lter replacement menu.

When the message shown in the gure appears, press
.

Remove any media.

Press .

Press several times until the screen shown on
the left appears.
Press
.
Press
twice.

Press .
Press
twice.

Press .
Preparations are complete when this screen appears.
TIME FOR
FILTER REPLACE
TIME FOR
FILTER REPLACE
MENU
SUB MENU
SUB MENU
MAINTENANCE
MAINTENANCE
REPLACE FILTER
REPLACE REAR
FAN FILTER