Basic Operation
10
Chapter 1 Basic Operation Chapter 1 Basic Operation
Switching the Power On and Off
Switch On
Switch Off
Leave the main power switched on at all times.
Never switch o the main power. Leaving the main power enables the automatic maintenance to be
carried out periodically. If the automatic maintenance is not carried out, it may result in the breakdown
of this machine, such as the breakdown of the print heads.
Never switch off the main power or unplug the power cord suddenly while opera-
tion is in progress.
Switching o the main power or unplugging the power cord suddenly while operation is in progress
may damage the print heads. Be sure to rst switch o the sub power. If the main power is accidentally
switched o, immediately turn the main power and sub power back on.
Close the front cover.
Switch on the
main power switch.
Switch on the
sub power switch.
Hold down sub power switch for
one second or longer.
The sub power switches off auto-
matically. Switch o after the output
is complete.
Rear
To Next Page
Loading...
