Roland LEF-12 - Re-Curing Ink

Fully Utilizing the Print Quality Adjustment Feature
43
Chapter 2 Fully Utilizing the Machine Chapter 2 Fully Utilizing the Machine
Re-curing Ink
Procedure

Press .

Press several times until the screen shown on
the left appears.
Press
.
The print heads move, and the print area is illuminated by the UV-
LED lamp.
Description
When the ink is not completely cured after printing is complete, cure the ink by illuminating it once again
with the UV-LED lamp. A characteristic of UV ink is that it cures quickly when exposed to the UV lamp, but
curing may be dicult for materials like cloth that absorb ink. The eect depends on the media material, but
this function may alleviate the symptom.
This feature cannot be used if media setup has been canceled. (When the media is being set up,
ashes. If you hold for one second or longer, the setup will be canceled. When canceled,
turns o.)
FUNCTION
UV SCANNING