41
Chapter 2 Fully Utilizing the MachineChapter 2 Fully Utilizing the Machine
Fully Utilizing the Print Quality Adjustment Feature
Preventing Soiling of the Media and Dot Drop-out
Procedure
Press .
Press several times until the screen shown on
the left appears.
Press
.
Press several times until the screen shown on
the left appears.
Press
.
Press to select an item.
Page
Automatic cleaning is performed each time prior to the start of
printing.
5 to 990 minutes
Automatic cleaning is performed when the cumulative printing time
reaches the value you set here. The color may become uneven because
the printing is paused.
NONE
Automatic cleaning is not performed.
Press to enable the setting.
Press in this order to return to the origi-
nal screen.
Description
In the following cases, ink tends to collect on the surface of the heads. Under some conditions, this ink may
be transferred to the media or cause dot drop-out.
When you use media prone to a buildup of static charge
When the ambient temperature is low
When the variation in unevenness on the print surface is high (There is a limit to the unevenness of the
print surface.)
P. 39, "Height Settings When the Print Surface is Uneven"
Selecting "PAGE" or a value from “5 to 990 minutes", the ink buildup is removed before or during printing while
printing is performed. Using "PAGE" or a value from "5 to 990 minutes results in longer printing times.
Default Settings
[PERIODIC CL.]: NONE
W : mm L : mm
H : . mm
SETUP MEDIA
To Next Page
Loading...
