Roland LEF-12 - Determining What Happens When Ink Runs out

Fully Utilizing the Administrative Features
48
Chapter 2 Fully Utilizing the Machine Chapter 2 Fully Utilizing the Machine
Determining What Happens When Ink Runs Out
This menu lets you change, according to your purpose, the operation that takes place when an ink cartridge
is empty.
Procedure

Press .

Press several times until the screen shown on
the left appears.
Press
.
Press
twice.

Press twice.

Press to select.
STOP: Printing pauses immediately when a cartridge becomes empty.
“CONT” (continue): Printing does not stop when a cartridge becomes
empty. When a cartridge becomes empty, a warning beep sounds.
Press to enable the setting.

Press in this order to return to the origi-
nal screen.
Description
When “STOP” is selected, printing pauses and so colors may be uneven. Ensure a sucient amount of remain-
ing ink before you begin printing.
When “CONT” is selected, printing does not stop even if ink runs out completely. To replace the cartridge, wait
until printing ends or press
to pause printing.
Default Setting
[EMPTY MODE]: STOP
MENU
SUB MENU
SUB MENU
INK CONTROL
EMPTY MODE
STOP CONT.
W :  mm L :  mm
H :  .  mm
SETUP MEDIA