Periodic Cleaning Maintenance
65
Chapter 3 Maintenance Chapter 3 Maintenance
Apply commercially available glass cleaner
to the cleaning stick.
Use a new cleaning stick.
Clean the locations shown in the gure.
Be especially careful to clean away any brous dust
(lint).
3.
Quit manual cleaning mode.
Close the front cover.
Press .
The print-head carriage moves to the right side of the machine.
After quitting the manual cleaning mode, the screen returns to the
gure as shown..
4.
Perform a printing test to verify the results of the procedure.
Perform a printing test to check the results.
Perform cleaning using the machine’s cleaning feature several times when necessary.
P. 20, "Printing Test and Normal Cleaning"
SETUP MEDIA
CLEANING. . .
> > >
Area to clean
While cleaning, be careful not
to touch the head surfaces
(nozzle surface) directly with
the stick.
To Next Page
Loading...
