HIGHLIGHTS OF CHANGES
Effective September 2006 Rev 2.0
Page Summary
General Reformatted entire manual from a two column layout. Replaced SPS 4000 information
with SPS 4001B information. Removed all references to JIS specifications. Added
information pertaining to the Local Operator Interface (LOI). Added information pertaining
to the remote electronics option.
Page TOC-4 Removed List of Illustrations and List of Tables from the table of contents in Rev 1.4.
Page i Moved from backside of cover in Rev 1.4.
Page 1-2 Updated Figure 1-1, Typical System Package to show SPS 4001B and remote electronics.
Page 1-5 Updated Figure 1-2, Hazardous Area Oxymitter 5000 Autocalibration System Options to
show the SPS 4001B.
Page 1-6 Added Figure 1-3, Membrane Keypad and Figure 1-4, Local Operator Interface (LOI).
Added step 4 under System Features
Page 1-7 Removed step 6 under System Features from Rev 1.6.
Page 1-10 Added Figure 1-7, Typical System Installation – Oxymitter 5000 with Remote Electronics.
Page 1-11 Added Mounting and Operation instructions for the SPS 4001B.
Page 1-14 thru 1-15 Updated the specifications table and added applicable certifications regarding the
Hazardous Area Oxymitter 5000.
Page 1-16 Updated Table 1-1, Product Matrix.
Page 1-18 Removed Table 1-4, Single Probe Autocalibration Sequencer Coding from Rev 1.4.
Page 2-1 Added first Warning.
Page 2-2 Added first Note.
Page 2-4 Added Figure 2-2, Hazardous Area Oxymitter 5000 Remote Electronics Installation.
Page 2-8 Added third Note.
Page 2-10 Added Figure 2-8, Remote Electronics Mounting and corresponding text.
Page 2-11 Added Note and fifth Warning.
Page 2-12 Added Figure 2-10, Electrical Installation - Hazardous Area Oxymitter 5000 with Integral
Electronics.
Page 2-13 thru 2-14 Added information under Electrical Installation with Remote Electronics.
Page 2-15 Added Figure 2-10, Electrical Installation - Hazardous Area Oxymitter 5000 with Remote
Electronics.
Page 2-16 Added information regarding the installation of the interconnecting cable. Removed Figure
2-7, Terminal Block from Rev 1.4.
Page 2-18 Added body text under IMPS 4000 Connections and SPS4001B Connections.
Page 3-2 Added Caution.
To Next Page
Loading...
