Effectivity: 912 Series
Edition 1 / Rev. 1
d04632
page 9
May 01/2009
BRP-Powertrain
INSTALLATION MANUAL
3) Preface
In this Manual the installation of all ROTAX 912 Series engines is described.
◆ NOTE: ROTAX 912 Series includes 912 A, 912 F, 912 S, 912 UL, 912 ULS
and 912 ULSFR.
Before starting with the engine installation, read this Installation Manual carefully. The
Manual will provide you with basic information on correct engine installation, a
requirement for safe engine operation.
If any passages of the Manual are not completely understood or in case of questions,
please, contact an authorized Distribution- or Service Center for ROTAX engines.
BRP-Powertrain GmbH & Co KG (hereinafter "BRP-Powertrain") wish you much
pleasure and satisfaction flying your aircraft powered by this ROTAX engine.
3.1) Remarks
This Installation Manual is to acquaint the owner/user of this aircraft engine with
basic installation instructions and safety information.
For more detailed information on operation, maintenance, safety- or flight,
consult the documentation provided by the aircraft manufacturer and dealer.
For further information on maintenance and spare part service contact the
nearest ROTAX distributor (see section 3.3).
3.2) Engine serial number
On all enquiries or spare parts orders, always indicate the engine serial number,
as the manufacturer makes modifications to the engine for further development.
The engine serial number is on the top of the crankcase, magneto side.
3.3) ROTAX Authorized Distributors for Aircraft Engines
See latest Operators Manual or in the Internet at the official Homepage
www.rotax-aircraft-engines.com.
To Next Page
Loading...
Need help?
General
