6.3 REPAIR PROCEDURES
46 DOC01-V6ULB+
6.3 Replacing the power cord
Tools required :
• Robertson square screwdriver #2 • Flat screwdriver
• Socket screwdriver 3/8 • Screwdriver extractor
CAUTION! MAINTENANCE OF THE ELECTRICAL SYSTEM MAY ONLY BE
CARRIED OUT BY QUALIFIED PERSONNEL.
Procedure:
1. Raise the bed to its highest position and apply the brakes.
2. Unplug the power cord from the wall socket.
3. Remove the eyelets securing the cable to the chassis.
4. Unscrew the grommet.
To Next Page
Loading...