Page 19 of 82 Revision No.: 1.5
Fig. 21: Line Modem menu screenshot – part 2
4.1.1 Setup
Fig. 22: Line Modem menu screenshot – Part 1
Fig. 23: Line Modem menu screenshot – Part 2
An explanation regarding the fields mentioned in Fig. 22-23 is provided below;
a) Auto Answer: Number of rings before auto answering. For example, if number '4'
is set, the communicator will answer a call after 4 rings.
b) Line Test: Select 'YES' to monitor the phone line and activate an alarm in case of a
disconnection.
c) Dial Delay: When dialing a pager service, some services require additional tone
menu browsing. Use this feature to set a delay between the phone number and the
tone browsing. Each “,” will represent the number of seconds in delay between the
phone number and the next browsing number.
d) Input Gain: For factory use only. If your communicator is unable to connect your
voice dial in phone line, consult your local dealer regarding this feature.
e) Advanced (see Fig. 24):
To Next Page
Loading...
