Page 37 of 82 Revision No.: 1.5
Use this option to test the SMS service (see Fig. 72).
• Insert a cellular phone number and press 'ENTER'.
The Communicator will send a following test SMS message: "The communicator is
ready to send you alerts using SMS".
9.4.8 Alarm Relay
Fig. 73: Alarm Relay screenshot
This screen tests the alarm relay which can be either a full square or an empty one
(Fig. 73).
9.4.9 Digital Input
Fig. 74: Test selection screenshot
This screen enables testing of digital inputs plugged into the system (see Fig. 74).
Blank Squares represent open input and Full Squares represent a closed one. If you
connect a device to one of the inputs and it remains blank, it means a problem exists
9.4.10 Relays
Fig. 75: Relays Test screenshot
This screen tests two alarm relays (Fig. 75).
To Next Page
Loading...
