Page 21 of 82 Revision No.: 1.5
_ _#_ _ _#', for example, 'House#Alarm#Attribute#Alarm#'. Moreover,
The enhance option will also send multiple alarms for the same house in
the same page. Maximum 256 characters are allowed. This option enables
all the alarms per house.
4.1.2.2 Test (send page)
Use this option to calibrate your pager connection. There is a delay between the
service provider answer and the time the message has been sent to the pager (see Fig.
26-27).
Fig. 26: Test screenshot – part 1
Fig. 27: Test screenshot – part 2
Test the connection and use Menu 4.1.1 (see Fig. 3), 'Dial Delay' option in order to
change the number of seconds before sending the massage.
4.1.3 Dial Out
Use this menu to verify the proper connection of the line to the communicator (see
Fig. 28).
• Dial your number and answer the phone. Test text over the phone is heard and
the screen will display the message 'OK'.
Fig. 28: Dial Out option selection Screenshot
To Next Page
Loading...
