Page 25 of 82 Revision No.: 1.5
6.3 System
The system (History) view shows the date, time and code. This serves as an error
handling (see Fig. 38).
Fig. 38: System Event option screenshot
7. Alarm
Go to the 'Alarm' menu (menu 7, see Fig. 3) to configure alarm options, reset and test
the alarm system (see Fig. 39).
Fig. 39: Alarm menu screenshot
7.1 Network
Fig. 40: Network menu screenshot
Fig. 40 shows the 'Network' menu.
7.1.1 Reset
1. Insert the unit number according to the alarm's origination (see Fig. 41). For
assistance, press the '?' (Help) key and on the screen the unit the alarm is
originating from will appear (Fig. 42).
To Next Page
Loading...
