Page 22 of 82 Revision No.: 1.5
4.1.4 Phone Line
View the phone line voltage (see Fig. 29).
Fig. 29: Phone Line option selection screenshot
4.2 GSM Modem
Fig. 30 demonstrates 'GSM Modem' menu which is selected by option 4.2 (see Fig.
3).
Fig. 30: GSM Modem menu screenshot
4.2.1 Setup
Fig. 31: Cellular Modem option screenshot
Set command updates the SMSC address, through which mobile originated SMS are
transmitted. The service center address must be present to complete delivery of SMS.
Most SIMs are delivered from the service provider with a service center already
programmed into the SIM. A “+” should be entered in front of the SMS address, but
is not required by all operator (see Fig. 31 for example).
4.2.2 Signal Strength
Fig. 32: Signal Strength option screenshot
To Next Page
Loading...
