Page 27 of 82 Revision No.: 1.5
Fig. 44: Reset Alarm option screenshot
7.2.2 Options
Fig. 45: Alarm Options features screenshot
The option list includes the following features (see Fig. 45):
Delay (sec): Delay in seconds before alerting.
Reminder (min): The time in minutes before re-alerting an active problem,
after reset, if the problem has not been solved.
Test: Frequency / At / Day: Set the alarm test parameters.
7.2.3 View
This section includes a history menu of all of the activated alarms (see Fig. 46). Note
that this history information relates to the communicator only. The history itself will
not appear on the net, for example, when suddenly there is no electricity. In this case
it will be seen on the communicator's history, not on the net itself.
Fig. 46: Alarm Viewer features screenshot
7.2.4 Disable Alarm
Go to Using the Device section.
7.3 Test (relay)
Press the 'ENTER' key to toggle relay, and see its functionality.
To Next Page
Loading...
