Platinum Plus
11
Manual/Auto Switches
The Platinum Plus can have up to 40 switches. Each switch usually
controls one relay to turn one device on or off. Assign functions to each switch
in the Install Menu. Initially none of the switches have a programmed function.
An indicator light by each switch indicates when that device is on.
Switch Monitor
Feature
The Platinum Plus
continuously checks the
position of each switch. If
you move a switch the
Platinum Plus asks you to
confirm the new position.
This reduces errors, and
helps you return switches
to their correct position in
case you changed them accidentally. If there is no confirmation for the new
switch position the alarm will operate. The Platinum Plus registers all confirmed
switch changes in History | Table of Events.
To Next Page
Loading...
