Platinum Plus
57
Shared Menus Programming Guide
Shared Menus, Continuation
Step 3 … 2. Management Menu Comments:
2.1
Manage |
Bird Inventory
Regularly enter cull and mortality
counts to maintain bird inventory
Make corrections easily the
same day only by entering
negative quantities (press +/-
key).
2.2
Manage |
Feed Inventory
Facilities with Feed Bin scales
automatically maintain feed
inventory.
Feed Monitor using Digital Inputs
requires manual entry of feed
deliveries.
Select Active Silo under Help
| Set.
Set Feed Alarms under
Alarm Settings (see
Advanced Alarms also).
2.3
Manage |
Time and Day
Make Current Time, Date and Day
of Week corrections.
2.4
Manage | Growth
Day & Flock
1. Adjust growth day if needed.
2. Flock Numbers increment
automatically.
3. Use the ‘New Flock’ function to
clear previous history data
between flocks.
The Flock Number can be up
to 6 digits. This gives you
room to encode Month-Day-
Year in the flock number for
future reference.
2.5
Manage | Alarm
Setting
Basic Alarms:
1. Global Alarm Delay: general
delay before signaling on the
alarm relay.
2. Sensor Low and High
Temperature Range:
temperature reading range
within which readings are
accepted from active sensors to
calculate average temp.
3. Sensor Alarm, Differential From
Low and High Alarm: zone or
individual active sensor alarm
thresholds, beyond the average
low and high alarm settings in
Temperature and Humidity
Menu.
4. Alarm Test
5. Feeder Over Time
The Platinum Plus provides
numerous additional alarms
in the advanced alarm menu.
Assign auxiliary alarms in
Install, Digital Inputs, and
selected associated relays if
desired in Aux Alarms
section. The digital inputs
must correspond with the
associated relay or an alarm
occurs.
The circuit breaker alarm can
signal pending circuit breaker
failure before it occurs.
Assign a temperature sensor
in Analog Sensors.
To Next Page
Loading...
