Platinum Plus
23
Standard Mode Example
Let’s Start Here!
First set up the Platinum Plus under the Install Menu. To enter the Install Menu, push the
Menu button at the main screen. Select the Install Menu with the arrow keys and press Enter,
or just press number key 6. In each sub-menu you can push the context sensitive Help key,
and choose the question mark icon for a brief explanation.
Install Menu
The Setup Menu makes basic operating mode choices. You can leave most of them at factory
defaults. The items commonly set are these:
Setup
1. STANDARD ventilation mode
2. 2 growing zones for half and full house, although some growers center house brood and
have 3 growing zones.
3. Ventilation styles that are used, that is power (also known as cross and minimum
ventilation), natural or conventional, and tunnel ventilation.
4. Advanced alarms to use water pressure, water flow and other advanced alarms.
Setup
Description Factory Default (Options) My Program
Ventilation Mode Standard (Precision) STANDARD
Language English (Spanish)
Temperature Unit Fahrenheit (Celsius)
Static Pressure Unit Inches of Water (Millibar,
Pascal, Centimeter,
Millimeter)
Fan Air Capacity Unit CFM, (M
3
/H)
Length Unit Feet, (Meters)
Baud Rate 9600 (1200 – 38400)
House Number 0 ACTUAL HOUSE #
Growing Zones 1-4 1 2 (as for half house and
full house), up to 4.
Minimum Vent (Power) Yes (No) YES (usually)
Natural Ventilation No (Yes) NO (usually)
Tunnel Yes (No) YES (usually)
History Resolution 1 hour (1 Min – 1 Day) AS DESIRED
Relay Layout
Next is Relay Layout. Be sure to check the appropriate blocks under Min (for Minimum,
Power or Cross ventilation),Nat (for Natural ventilation) and Tun (for Tunnel ventilation).
To Next Page
Loading...
