SME VoIP Handset guide
Proprietary and Confidential Page | 18
To delete all contacts in the local contact list, press the left softkey “Yes”.
To go back to the “More” menu, press the right softkey “No”.
6.1.4 Speed dial/One Touch Dial
With this feature it is possible to add a contact to the speed dial. Hereby, this contact can be called directly from
idle by long-pressing the speed dial number that the contact is added to. The speed dial feature allows the user
to assign a speed dial number (2 – 9) to a contact. This enables the user to call a contact by making a single long-
press on one of the number keys (2 – 9) when in idle.
A contact can only be assigned to one speed dial number at a time. The first defined number of the contact will
be dialed when the speed dial key is pressed. This means that if all numbers (work, mobile, home, and other) are
defined for the contact then the work number will be dialed. If the work number is not defined, then the mobile
number is dialed etc.
NOTE: The ‘1’ key is reserved for voicemail. Long key press on ‘0’ is used for starting a normal dial string with ‘+’.
How to setup speed dial
Prerequisite: There must be at least one contact in the contact list.
Steps:
1. Go to the contact list > scroll to the contact that you want to assign a speed dial number to.
2. Select “More” > select “Speed dial”
3. Move to the speed dial number (2 – 9) that you want to assign the contact number to.
4. Select “Add”. The contact name should be appended to the speed dial number.
5. Leave the speed dial list by pressing the red “On-hook” key. Press the “On-hook” key to exit “More”
menu, and exit the contacts list by pressing “On-hook” key again.
The images below illustrate how the local contact ‘Adam’ is added as a speed dial number to 2.
How to call a speed dial number
Prerequisite: The handset is in idle and the key lock is not active.
Steps:
1. Make a long key press (> 2 seconds) on a speed dial key that is assigned to a contact. The first number
defined is dialed.
This way the local contact ‘Adam’ can be called directly from idle by long-pressing as displayed below:
To Next Page
Loading...
